Aural
Bespoke Reference Transducer

Sound in Its Absolute State

Handcrafted around 50mm vapor-deposited beryllium dynamic transducers and sculpted aerospace titanium. Zero coloration. Unrivaled intimacy.

Titanium
Aural Edition 01 titanium over-ear luxury headphones
Edition 01 / Batch Copenhagen
Acoustic Distortion < 0.02% THD+N
Continuous Playback 48 Hours
Hand-assembled in Copenhagen
Inaugural run ships November 2025
Strict serial allocation / 1,200
Acoustic Architecture

Engineered for Vanishing Distortion

System Topology // Pure Planar & Solid Beryllium Chamber

Sectional View // Mk. IV
Acoustic Chamber Iso 01
Macro detail of perforated beryllium transducer and precision milled acoustic chamber
01. Forged Yoke

Titanium Grade 5 damping ring

02. 50mm Foil

Solid vapor-deposited beryllium

03. Dual Chamber

Helmholtz acoustic sink

Diagram ref. 50-BE-DK Tolerances calibrated to ±0.4 microns
Resonance Control

Aperiodic Damping

Micro-perforated sintered acoustic vents eradicate internal wave reflection.

Driver Matrix

Neodymium N54

Symmetrical 1.8 Tesla magnetic flux driving instantaneous micro-dynamics.

Acoustic Genesis

Standing Waves Eradicated. Pure Transduction Realized.

By pairing our custom 50mm solid beryllium diaphragms with dual acoustic chambers tuned to suppress standing waves, AURAL reproduces frequencies from 4 Hz to 48 kHz with tactile transient speed.

Every acoustic facet—from the milled rear soundguide to the internal dissipation wool—serves a singular objective: preventing cabinet colorations before they touch the human ear canal.

Bandwidth Envelope
4 Hz – 48 kHz ±0.5 dB

Full spectrum transient integrity far exceeding audible human perception.

Total Harmonic Distortion
< 0.02% at 100 dB SPL

Surgical clarity even under extreme orchestral and bass dynamic peaks.

Signal Path Architecture
Quad DAC Topology

Fully balanced dual-mono differential channels with dedicated operational amplifiers.

Anatomy of Presence

Tactile Architecture, Pure Instrument

Every contact point is considered. Monolithic metals, selected full-grain hides, and mechanical detents engineered for lifetime precision.

Craft Study // 04

Raw Metallurgy & Saddlecraft

Scottish hides cured with chestnut tannins meet monolithic titanium machined under recirculated oil coolant in Switzerland.

Macro detail of hand-stitched semi-aniline leather headband and knurled titanium controls
Tension: 4.2N Micro-Stitch: 0.8mm
01 // Materiality Billet 6AL-4V

Milled Grade 5 Titanium

Yokes and gimbals forged from monolithic aerospace billets, hand-finished to a satin grain. Eliminates micro-resonances inherent in stamped aluminum.

Monolithic Yoke 248g Core
02 // Ergonomics Bridge of Weir

Scottish Semi-Aniline Leather

Hand-stitched headbands wrapped around dual-density memory foam for pressure-free all-day listening. Breathable lambskin ear cushions contour instantly.

Calfskin Envelope Zero Fatigue
03 // Transmission UWB Link

Lossless UWB Streaming

Native 24-bit/192kHz uncompressed wireless transmission via dedicated low-latency spatial bridge, bypassing standard Bluetooth codec degradation entirely.

Bit-Perfect 192kHz < 5ms Latency
04 // Interface Magnetic Detent

Analog Tactile Controls

Solid knurled brass rotary volume crown with stepped magnetic detents, bypassing touch capacitive lag for visceral, authoritative calibration.

Knurled Brass 64 Clicks / Rev
Tolerance Threshold: ±0.005mm
Read Metallurgical Dossier
Empirical Acoustic Validation

Precision Measured in Fractions

Calibrated across an uncompromised testing threshold inside anechoic test chambers in Copenhagen.

Metric / 01 ANC Active
52 hrs

Continuous active playback with hybrid active noise cancellation engaged at reference volume.

0.0V drop-off profile
Metric / 02 1kHz @ 94dB
0.018 %

Total harmonic distortion across the entire critical mid-band, eclipsing studio monitor thresholds.

APx555 validated
Metric / 03 Total Weight
312 g

Perfectly balanced mass distribution engineered for zero cranial pinch over extended listening sessions.

Bespoke titanium chassis
Metric / 04 Pure Path
100 %

Analog bypass mode via shielded silver-plated balanced 4.4mm Pentaconn transmission cable.

Zero DSP intervention
Measurement protocol: IEC 60268-7 Standards
Serial Lab Cert: #AURL-CPH-018
Empirical Calibration

Technical Architecture

Exhaustive engineering metrics validated under lab conditions. Every acoustic parameter is quantified to preserve master-grade resolution.

Section 06 / Benchmarks

Aural Edition 01

Constructed without compromise. Measurements documented in Copenhagen on calibrated G.R.A.S. 45BB-12 KEMAR acoustic fixtures.

Acoustic Class Grade-A Reference
Production Run 1,200 Serialized
Certification Hi-Res Lossless Dual
01 Transducer Type

Custom 50mm Vapor-Deposited Beryllium Dynamic Driver

Laser-trimmed foil surround with neo-radial magnetic motor

02 Frequency Extension

4 Hz – 48,000 Hz

Sub-harmonic reach beyond human audible threshold

03 Wireless Protocol

LDAC, aptX Adaptive, aptX Lossless, AAC, SBC

Bluetooth 5.4 with uncompressed bitstream pass-through

04 Wired Connectivity

3.5mm Unbalanced / 4.4mm Balanced Pentaconn / USB-C Lossless

Direct pure DAC line-in decoding up to 32-bit / 384kHz

05 Acoustic Isolation & Voice

8-Mic Beamforming Array

Physical wind-rejection baffling with adaptive ambient transparency

06 Mass & Balance

312 Grams

Grade-5 titanium yoke with memory cushion weight distribution

07 Battery System

52 Hours (ANC Active) / 68 Hours (ANC Passive)

Quick Charge: 15 minutes delivers 8 hours continuous listening

08 In The Box

AURAL Edition 01 Headphone

Handcrafted Nappa leather hard-shell travel case

1.5m 4.4mm balanced Pentaconn OFC cable

1.2m 3.5mm braided silver-plated cable

Machined gold-plated 6.35mm studio adapter

Braided USB-C audio & charging cable

Inaugural Allocation

Secure Edition 01 from Batch Copenhagen

Preorders include complimentary custom monogrammed hard case and numbered provenance certificate.

Strict Allocation / 1,200 Units

Claim Your Serial Number

Edition 01 is strictly limited to 1,200 production pieces, individually engraved and tuned at our Copenhagen workshop. Includes bespoke leather travel trunk and lifetime driver calibration guarantee.

Tier Pricing: $850 USD ($100 initial deposit)
Aural Edition 01 bespoke leather travel presentation trunk
Included: Travel Trunk & Certificate
Reserve Edition 01 — $100 Deposit

Full balance charged upon dispatch. Worldwide complimentary insured courier shipping.

Delivery Window November 2025
Workshop Origin Copenhagen, Denmark
Acoustic Assurance Lifetime Calibration